Racecar Book.com » 5000 Horsepower on Methanol

index of terms and names for methanol book

Bob — Tue, 03 Aug 2010 04:54:15 +0000

You can download a 6 page index of terms from “5000 Horsepower on Methanol”. You can also download an index of names from this publication as well. Check the shopping page.

ALREADY AN OWNER: These indexes will help to find page numbers for various topics in the manual; such as octane, nitro, temperature, air to fuel ratios, and many others.

CONSIDERING A PURCHASE: These indexes reveal the extent of coverage and the broad range of topics throughout the publiication.

problems viewing or ordering

Bob — Tue, 25 May 2010 08:09:40 +0000

We are revising our Server source for more reliable viewing. That should be done by the end of the week. If you had problems shopping or ordering, call (916) 419 6649 or email (bob@racecarbook.com) for help. Thanks Bob Szabo

TUNING THE DAY BEFORE

Bob — Thu, 29 Oct 2009 04:00:21 +0000

The racer is one step closer to setting up a tuning plan for density altitude like we wrote about throughout our technical manuals; the racer can log onto www.airdensityonline.com and get current air density and density altitude for many race sites throughout the US; and soon density altitude forecasting for your day before planning. When we raced, we would look up the weather forecast and manually calculate density altitude for the following day, using the math in our tech manuals. That is soon to be automated in the site link.

5000 HP?

Bob — Thu, 29 Oct 2009 03:50:02 +0000

Dyno results just in from one of our customers on his new twin turbocharged alcohol Big Block: dyno’d 2,500+ HP at 25 psi boost with a turbo setup capable of 50 psi boost. He reports that the most boost that he is currently seeing in the installation is 35 psi, blowing the tires away on the drag racecar.

BLOWER BOOST & FUEL SPLIT

Bob — Mon, 13 Jul 2009 23:08:33 +0000

Question: Different racers get different boost readings often from similar blown engine combinations. Why do some get that high boost reading and others do not?

Answer: Boost reading is also a function of the fuel split. Fuel split is the amount of fuel delivered to the blower hat injector versus the amount of fuel delivered to the intake manifold. That amount of fuel split determines the amount of cooling in the manifold. More fuel in the hat causes more cooling. That causes a denser mixture which then causes a lower boost. It then causes a lower boost reading and not necessarily less horsepower as many are finding out. A lot more information about fuel split is provided in 5000 Horsepower on Methanol. More information about boost readings is in Fuel Injection Racing Secrets.

BRACKET RACE TUNING BLOWN FI THE DAY BEFORE

Bob — Sat, 20 Jun 2009 22:43:46 +0000

In our drag racing, we did use air to fuel ratio as a controlled value to get the engine into a linear range. That task is an extensive explanation through out writings. The linear range is where the engine is completely predictable. We achieved that very well in our racing. Once we operated the engine in a linear range, we were able to vary our shift point from a Quarter Jr program predictions to get our drag racing ET predictable. A tuning plan was done the day before an outing. Weather predictions from the internet were used. The Quarter Jr program was used to predict the performance with the various air densities that were predicted over the course of the racing time period. For example, early qualifying was often early in the morning when air density was up. Then later qualifying was late in the afternoon when air density was lower. The different air densities were put into the Quarter Jr. program to get the predicted performance. Shift point was varied to produce the target ET for that air density. In addition I used math that is throughout our writings to determine jetting for the various air densities. Then, with fuel injection jetting and shift point predetermined by the time of day (different air density), I wrote out a plan for jetting and shift point changes. During race day, I simply looked up the time and my tuneup plan, did the changes, and spent the day eating hot dogs, networking with others, and of course, maintaining the racecar. It was a blast and took all the pressure out of tuning on race day. There was simply little to no tuning decisions on raceday. And no engine damage from whops’s.

METHANOL PURITY?

Bob — Fri, 17 Apr 2009 23:12:52 +0000

Question: What is pure methanol?
Answer: If it is sold as pure methanol, it is supposed to be well over 99% methanol. It is a baseline compound that should behave the same regardless of supplier unless it is mixed with something else such as a top end lube or it is contaminated. Water is a common contaminant.? There is a difference in NHRA and IHRA fuels test methods for the methanol classes. The fuel you can run at those events is the fuel that passes their fuel test. I am not sure it would necessarily pass a chemistry lab test however. There may be some differences. One of the Kinsler engineers and others have mentioned observing differences from different suppliers, but I am not sure those experiences were with tested fuels.

Runner up finish at Sportsnationals

Bob — Mon, 30 Mar 2009 04:22:39 +0000

Congrats to Scott Williamson for great result reported as follows:

“… I raced last weekend at the Jegs Cajun Sports Nationals at No Problem Raceway in Belle Rose La., and I was amazed at the results I had by using the formulas from your books. … I was able to tune my car with confidence and see repeatable results.

I run in Top Dragster and was able to Qualify 5th with a run of 6.49 at 206 mph and had a runner up finish in the Top Dragster Shootout.”

METHANOL FUEL CHECK IN DRAG RACING

Bob — Tue, 23 Dec 2008 22:54:34 +0000

Question: Methanol for both IHRA and NHRA Drag Racing
Answer: Both organizations test methanol with different methods. If you have fuel that passes one organization, it may or may not pass the other organization all of the time. I met the fuel check supervisors for both organizations when I was developing 5000 Horsepower on Methanol, and they were both knowledgeable and helpful. Information from both sources is in our methanol book.

TOP END LUBE ADDITIVE TO METHANOL

Bob — Tue, 23 Dec 2008 22:49:59 +0000

Question: Top lube?
Answer: Most racers I have talked to have good success with top lube to inhibit corrosion. Some previous info mentioned some accumulation over time. The reason NHRA and IHRA do not allow it in fuel checks is they cannot distinguish between power enhancing additives (illegal) and top lube in their tests. So you are stuck with the mostly pure stuff for the national and divisional class racing. More info on top lubes in 5000 Horsepower on Methanol.