Shopping

*Recommended by Brendan Murray of Performance Motor Sports.
*Recommended by Don Jackson of Don Jackson Engineering.
*Recommended by Pete Jackson Gear Drives of Pete Jackson Gear Drives.
*Recommended by Vern Tomlinson, Hilborn Fuel Injection
*applicable for all forms of racing that use methanol as a fuel including drag racing, jr dragsters, tractor pulling, Bonneville, boat racing, and go-kart racing.
*several hundred photos and illustrations of key concepts
*over 300 pages.

TECHNICAL INFO IN THIS REFERENCE:

POWER IMPROVEMENTS IN ENGINE & INTAKE DESIGNS
* carburetors & methanol with jetting examples
* mechanical fuel injection & methanol with jetting examples
* electronic fuel injection & methanol
* methanol in drag, circle track, & land speed racers
* methanol in boat drag, circle, & top speed racers
* effects of weather on air density & methanol power

NORMALLY ASPIRATED RACING ENGINES
* normally aspirated methanol & jetting examples
* air to fuel ratios of normally aspirated methanol
* normally aspirated intake runner size & fuel enrichment

BLOWERS & METHANOL
* superchargers & methanol with jetting examples
* air to fuel ratios of supercharged methanol
* turbocharges & methanol
* charge-air cooling & methanol

BLOWER BOOST & POWER
* why a high boost reading in a supercharged engine may be indicative of an engine cylinder head problem p. 9-71
* why the boost reading in a supercharged engine is indicative of the fuel split between hat & port nozzle and recommended fuel split ratios

BIG POWER FROM SCIENCE & TUNING THAT MONEY CANNOT BUY
* chemical dissociation before & during combustion affects power & backfiring
* effect of methanol enrichment on power making
* table of methanol engine compression ratios p. 9-69
* analysis of a 500 ci, 9,500+ HP engine on methanol p 15-132
* putting methanol into a racer with the fuel tank in the rear p. 6-51
* table of racing fuel weights p. 10-78
* various normally asp. & supercharged dyno power levels

NITRO & METHANOL
* air to fuel ratios of nitro / methanol mixtures
* nitro temperature info
* nitro fuel weight
* brake specific fuel consumption

NITROUS OXIDE
* nitrous & methanol
* nitrous & gas with methanol

ETHANOL
* ethanol details compared to methanol
* brake specific fuel consumption
* ethanol temperature info
* ethanol fuel weight

GASOLINE & METHANOL
* methanol engine dyno HP vs. gasoline engine dyno HP example p 6-49, 9-65
* gasoline details compared to methanol
* gasoline & methanol blends p 15-133
* why methanol has half the amount of heat energy than gasoline, yet why it makes more power
* how to tune for flame speed differences between methanol & gasoline
* air to fuel ratios of gasoline
* gasoline temperatures including vaporization & self ignition
* brake specific fuel consumption p 16-149

TEMPERATURE & METHANOL
* how engine temperature effects methanol engine power
* ideal intake manifold & engine temperatures for power
* why the methanol boiling point can be better in bracket drag racing than the gasoline boiling point for consistency p 9-75
* how to avoid power limits from methanol self ignition and hot plate ignition temperature effects
* cooling from methanol many times that of gasoline

METHANOL OCTANE & RACING POWER
* methanol octane characteristics throughout chapter 15
* knock in methanol p. 15-131

METHANOL INTAKE, COMPRESSION, POWER, & EXHAUST
(applicable to other fuels)
* intake cycle throughout chapter 18, 19, & 20
* compression cycle throughout chapter 21
* power cycle throughout chapter 22
* exhaust cycle throughout chapter 23

CURRENT & FUTURE: The presentation goes far beyond anything ever published for racing methanol. It is all about methods that are within current racing rules as well as innovations that are beyond.

INFO FOR ALL POWER LEVELS:
(1) Applies to various power levels & engine sizes from one half horsepower to 5,000 horsepower. Setups for EXTREME power levels on methanol.
(2) Information in the book is written around the 4 cycle engine. However, much of it applies to 2 cycle engines as well as rotary engines. Where the information applies to those designs is included as well.

View the table of contents

We have received feedback from many of our readers. See what they have to say.

-information about most major manufacturers of constant flow fuel injection in the US including Enderle, Hilborn, Kinsler, Ron's, and others.
-List price $99.99 per book. Currently selling for $69.99 + shipping/handling and any applicable sales tax.

High and low HP applications

There is a power difference between
(a) small and large fuel injection engines
(b) inexpensive & high dollar cylinder heads
(c) mild & radical cams, and many other parts. However, the engine will not run well with any of these unless the fuel injection is set up properly. This book tells about setups used by successful race engine tuners to reach that goal.

About the book

Knowledge is the key to performance & winning. With that in mind, this book provides knowledge about mechanical fuel injection for more powerful and reliable performance.

Mechanical fuel injection is the preferred choice in:
1. many drag racing applications
2. other forms of auto racing
3. boat racing drag and circle
4. custom auto & boat shows
5. go Kart
6. Junior drags.

The drag race blown alcohol application is highlighted as an example although much of the information is applicable to other auto and boating sports. Additional information is provided for fuel injection tuning of gasoline, ethanol, and nitomethanol powered race engines as well.

See pictures and information from the book.
View the table of contents

TABLE OF CONTENTS

JETTING CHARTS TEXT

1 INTRODUCTION
2 COMPARISON TO OTHER FI SETUP & TUNING METHODS
3 LOW COST NUMERICAL ANALYSIS
4 PRELIMINARY STEP TO ALL OTHERS
5 INTRODUCTION TO AIR TO FUEL RATIO FOR TUNING

MATH TO DETERMINE JETTING CHARTS

6 ENGINE AIRFLOW
7 ADJUSTMENT FOR AIR DENSITY
8 FUEL FLOW
9 ENGINE FUEL FLOW
10 AIR TO FUEL RATIO
11 DETERMINE FUEL PRESSURE FOR TUNING
12 FINE TUNING PRESSURE
13 FUEL PUMP VOLUME @ DIFFERENT ENGINE RPMs
14 HIGH SPEED BYPASS JETTING
15 ENGINE RPM FOR HIGH SPEED (HS) OPENING
16 TOTAL BYPASS JET AREA
17 TOTAL JET AREA (WITH NO HIGH SPEED)
18 TOTAL JET AREA (WITH HIGH SPEED)
19 PRESSURE CHECK
20 JETTING CHARTS INTRODUCTION

JETTING CHARTS

21 JETTING CHART FOR 350
23 JETTING FOR 350 WITH FUEL PSI ADJ. PER MEAS. VALUES
24 JETTING TRENDS FOR 350
25 JETTING FOR 350 FOR LOWER AIR DENS / HIGHER ALT
26 JETTING TRENDS FOR 350 @ HIGH ALTITUDE
27 JETTING FOR 350 FOR LEAN AFR
28 JETTING FOR 350 WITH HIGH VOLUMETRIC EFFICIENCY
29 JETTING FOR 350 WITH LEANER AFR
30 JETTING FOR 350 WITH A RICHER AFR
31 EFFECT OF DIFFERENT SIZE FUEL PUMPS FOR 400
32 JETTING FOR DIFFERENT ENGINES FROM 150 THROUGH 450
33 JETTING FOR ENG. FROM 150 TO 450 @ DIFF. AFRs & PSIs
34 EFFECT OF HIGH SPEED BYPASS
35 HIGH SPEED BYPASS OPENING
36 JETTING WITH HIGH SPEED FOR 400
37 JETTING WITH HIGH SPEED FOR 350
38 JETTING WITH HIGH SPEED FOR 300
39 JETTING WITH HS FOR 275 AT VARIOUS PSI's
40 JETTING WITH HIGH SPEED FOR ENGINES FROM 150 TO 450
41 JETTING WITH HS FOR 325 FOR DIFF. AIR DENS. / DENS. ALTs
42 JETTING WITH HIGH SPEED FOR 300 FOR DIFFERENT AFRs
43 JETTING WITH HS FOR 300 FOR DIFF. PSIs / DIFF. AFRs

SUMMARY, DATA CHARTS, REF., INDEX

44 SUMMARY
45 OTHER CHARACTERISTICS
46 PUTTING IT ALL TOGETHER
47 JETTING EXAMPLES
48 FUEL PUMP SIZE CHART
49 JET SIZE CHART
50 REFERENCES
51 UNITS
52 INDEX

Jetting for big block V-8 engines from 400 to 900 cubic inches (6.6 to 14.8 liters)

FOR CONTINUOUS FLOW FUEL INJECTION
• Kinsler
• Rons
• Enderle
• Hilborn
• Crower
• Pete Jackson
• Algon

FOR THE RACING FUEL INJECTION TUNER
• For auto, tractor, & boat racing METHANOL V-8 engines
• For Big Blocks from 400 ci (6.6 L) to 900 ci (14.8 L)
• For all brands: stackers, tunnel rams, & throttle bodies
• Jetting for optimum air to fuel ratios & fuel pressure
• Jetting for air density changes
• Math to determine custom jetting
• Race tuning

ABOUT THE MANUAL: This is the second in a series of manuals about jetting for mechanical fuel injected race engines. The first was for the small block. This manual is specific to larger big block V-8’s on methanol. Methanol has a wide tuning window that can be varied as much as 30% between a lean and a rich limit. Setup & tuning of a methanol fuel injection engine is done with proper fuel pump size and jetting. Even after a proper fuel pump size is determined, tuning with jetting can be an endless task. This includes variations from engine component changes and weather changes. While the adjustments are few, their numbers of combinations are large. Because of that, this manual provides the following:

• Editorial to describe some of the science of tuning with jetting
• Math to provide a numerical understanding of the jetting basis
• Jetting tables to illustrate individual tuning relationships
• Additional jetting tables within those pages for various engine sizes.

Description of contents:
1 intro to science applicable to racing
2 motorsports standard atmosphere MSA
3 MSA temp for racing
4 MSP pressure for racing
5 measuring ambient pressure for racing
6 density altitude for racing
7 how much water is in the air
8 SAE horsepower
9 HP correction factors
10 drag racing weather & racer weight performance corrections
11 effect of race track temperature & slope
12 effect of aerodynamic drag & head wind on performance
13 history & technology basis

Written by P. Hale, originator & developer of Quarter Jr., Drag Race Pro, and other racing software.