Several hand sanitizers are reported to be contaminated with methanol. Among those reported on Fox Business News are Saniderm Advanced Hand Sanitizer and several others manufactured in Mexico. Our 5000 Horsepower on Methanol tech manual has an entire chapter on methanol hazards to skin, lungs, eyes, etc. It is reported that methanol cannot be made […]
Note Latest Addition: All of our Book Inventory was packaged and shrink wrapped before the December, 2019. A gift of one or more of our books to your favorite racer should be free of the latest COVID 19 spread that going around. Note: While many around the world are shutting down, we are still shipping […]
Read those spark plugs for good NHRA drag racing preseason tuning; check https://airdensityonline.com/track-results/Wild_Horse_Pass_Motorsports_Park/ for current air density, density altitude, water grains, temperature, humidity, uncorrected barometer, wind speed, wind direction, dew point, saturation pressure, vapor pressure in imperial or metric units; yesterday’s record and tomorrow forecast already determined in air density units. Check https://airdensityonline.com/free-calcs/ for free […]
Setting up a new MFI fuel system: main bypass adjustment to control the air/fuel ratio adjustment of the combination of the main bypass and nozzle sizes to maintain an optimum fuel pressure range from the lowest to highest engine RPM. Changing the main bypass jet for tuning affects the air to fuel ratio and fuel […]
Customer Inquiry One of our customers recently inquired about idle lope in his funnycar dragster. ‘What can I do to minimize idle surge on our funny car? It’s difficult to stage at the starting line. It has a Bruno (torque converter), Lenco transmission, Enderle Bird Catcher fuel injection hat, Enderle K type barrel valve with […]
Rons Fuel Injection has provided us with air flow data for their throttle body setups. We analyzed the power potential of these simple and very popular fuel injection systems. Racing engine size capabilities were determined at the flow CFM numbers provided by Rons Fuel Injection. For 100% air density, horsepower capabilities were also determined. Rons […]
Rons Fuel Injection provided MFI throttle body flow data so that we could analyze the power potential of these low cost, simple fuel injection systems. Racing engine sizes and horsepower potentials were determined at these flow cfm numbers for 100% air density, and are included. Rons FI MFI Toilets 3-3/4″ = 1240cfm: can feed 595 […]
Due to popular demand, we can now provide our ProCalc fuel injection jetting calculator already set up to run your fuel injection combination. This special service includes an extensive evaluation of your fuel injection setup and a custom fuel injection manual all about your engine. We have already done different fuel injection configurations, fuels, and […]
We recently made a demo video showcasing our book, 5000 Horsepower on Methanol! Check it out: If you want more information about this book, check out our store!
We’re starting to delve into video! For our first couple of tries, we’ve made demo videos of each book. Check out the video we made for Fuel Injection Racing Secrets: Or get more information about the book in our store!